Driveway gates and automatic gate systems across New Jersey
Swing, sliding and cantilever gates in ornamental aluminum, wood and steel — with the automation, access control and safety sensors specified for the gate you actually have.
A driveway gate is the only part of your fence with moving parts
A fence stands still. A driveway gate opens and closes thousands of times a year, carries its own weight on two posts, catches wind like a sail and — once automated — becomes a piece of powered machinery in the space your family and your car pass through every day. That is why a gate is not simply a fence panel on hinges, and why the parts that fail are almost never the parts people shop for.
The decisions that matter get made before anything is ordered. Whether your driveway can take a swing gate at all, or whether the grade and setback force a sliding or cantilever system. Whether the posts are set deep enough in concrete to carry a leaf plus an operator for a decade. Whether the opener is sized for the real weight and duty cycle rather than the cheapest unit that technically moves the gate. Get those right and the gate is invisible in the best way — it just works. Get them wrong and it sags, binds, or drops out of square by the second winter.
We build the gate and the fence line as one system, in the same material and profile, so the entrance reads as part of the perimeter instead of a gap with hardware in it. And because a gate is the one thing we install with electronics and moving parts, we service what we build — you call the people who set the posts, not a call centre.
The four decisions that determine whether a gate lasts
None of these are visible in a photograph, and all four are where a cheap gate quote saves its money.
Decided by your driveway, not a catalog
A swing gate needs clear arc space and a level landing. A sliding or cantilever gate suits a sloped approach, a short setback from the road, or a wide commercial opening. We measure the grade and the approach before recommending either.
The opener matched to the actual gate
Weight, width, wind load and how many times a day it cycles all determine the operator. An undersized opener on a heavy wood gate is the most common reason a gate system fails early.
Photo-eyes and safety edges, not optional
An automated gate is moving machinery in a driveway people and cars use daily. Sensors that stop the gate on a car, a pet or a person are required by code and by every manufacturer we install.
Gate posts carry everything
A driveway gate post takes the entire load of the leaf plus the operator, cycling thousands of times a year. These get set deep and in concrete — it is the difference between a gate that still closes square in ten years and one that sags in two.
From site visit to programmed remotes
Four steps, permits included, with everything tested in front of you before we leave.
Site visit & measurement
We look at the driveway width, grade, setback from the road and where power can reach. That visit decides swing versus slide — it is a site call, not a style preference. You get an itemized written estimate.
Design, access & permits
We settle material, height and leaf configuration, then how you actually open it: keypad, remote, intercom, or phone-based access. We file the township permit and coordinate the utility markout.
Posts, gate & automation
Posts set deep in concrete, gate hung and squared, operator installed and travel limits tuned, safety sensors positioned and tested, and low-voltage runs made to any keypad or intercom.
Testing & handover
We cycle the gate with you, test every safety sensor, confirm the battery backup works with the power cut, program your remotes and codes, and hand over the warranty paperwork.
What you get when Fence Pro by Bruno builds your gate
Gate and fence as one system
A gate that does not match the fence line reads as an afterthought. We build the perimeter and the entrance together, in the same material and profile.
Automation done properly
Operator sized to the real load, travel limits tuned on site, safety sensors positioned and tested, battery backup verified against an actual power cut.
Slopes and awkward approaches
Northern NJ driveways rarely meet the road square and level. Sliding and cantilever systems solve entrances a swing gate physically cannot.
Residential and commercial
From a single-leaf ornamental gate on a home driveway to a cantilever entrance on a commercial lot with rotating staff and vendor access.
Permits filed for you
Gate projects draw more township scrutiny than a plain fence — setbacks, sight lines and how far a leaf may travel toward the road. We handle the filing.
We service what we install
A gate is the one part of your fence with moving parts and electronics. When it needs adjustment, you call the people who built it.
"They put in a double aluminum gate with a keypad at the top of a sloped driveway two other companies said would need to be regraded first. It clears perfectly, closes square, and the intercom means we never get out of the car."
Driveway gate installation across northern New Jersey
We install and automate driveway gates in every county below. Each county page covers the towns it serves and the local permit rules that apply to gates.
0% interest financing available
A gate is the largest single item most fence projects include. Spread it over time at zero extra cost instead of scaling the project down.
See financing options- 0% interest for qualified buyers
- Quick approval through our financing partner
- Pay over 12, 24 or 36 months
- No prepayment penalty if you pay off early
Driveway gate questions, answered
Cost, swing versus sliding, materials, automation, power outages and permits.
How much does a driveway gate cost in New Jersey?
Swing gate or sliding gate — which do I need?
What material is best for a driveway gate?
Do I have to automate the gate?
What are my options for opening the gate?
What happens to an automated gate in a power outage?
Do I need a permit for a driveway gate in NJ?
Do you service and repair existing gates?
Ready to close off your driveway?
Free written estimates. Permits filed for you. Residential and commercial gate systems anywhere in New Jersey.
Available Monday – Saturday, 8am – 8pm
Planning the rest of the perimeter?
A gate works best specified alongside the fence it sits in. See aluminum installation (what we pair with most gates), wood installation, or commercial fencing for access-controlled sites. Already have a gate that sags or will not close? See fence and gate repair. For the full background, read our guide to driveway gates and automatic gate systems in NJ.
Explore all fence options →